DerekS MA18.5 Posted January 19, 2020 Report Share Posted January 19, 2020 I have tried everything to get this wheel off the steering shaft guys. Tree fell on it and bent it. I’ve used pullers, hammer persuasion. help please? Quote Link to comment Share on other sites More sharing options...
HoneyB Posted January 19, 2020 Report Share Posted January 19, 2020 Are you trying to save the shaft or the wheel? Either way side grinder with a thin cutting disk. if your trying to save both put the pressure back on with the puller and tap with a hammer. It will move rather than bounce 1 Quote Link to comment Share on other sites More sharing options...
jh141 Posted January 19, 2020 Report Share Posted January 19, 2020 It looks like the shaft in the helm is bent. If both the steering wheel and helm shaft are bent then cut the shaft to separate the two and rebuild or have the helm rebuilt replacing the bent steering shaft. The remaining piece of shaft could then be pressed out to see if the steering wheel is worth trying to reuse. 1 Quote Link to comment Share on other sites More sharing options...
DerekS MA18.5 Posted January 21, 2020 Author Report Share Posted January 21, 2020 Thanks guys! Quote Link to comment Share on other sites More sharing options...
HoneyB Posted January 21, 2020 Report Share Posted January 21, 2020 But did you get it off? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.