Pabel1993 Posted June 13, 2020 Author Report Share Posted June 13, 2020 So update I’ve got a chance to look at it and the motor will trim/tilt fine but no matter where the motor is tilted at I can lift it up with my hands any ideas still Quote Link to comment Share on other sites More sharing options...
MuddyBottomBluz Posted June 13, 2020 Report Share Posted June 13, 2020 Seals are bad, Letting fluid pass by. Does the ,motor slowly go down when trimmed in the up position? Sounds like rebuild time! Stupid suggestion, might be a long shot but one more thing to check before it gets expensive..........................Have you checked to make sure the manual bleed screw(s) are closed tight,? Quote Link to comment Share on other sites More sharing options...
Pabel1993 Posted June 14, 2020 Author Report Share Posted June 14, 2020 8 hours ago, MuddyBottomBluz said: Seals are bad, Letting fluid pass by. Does the ,motor slowly go down when trimmed in the up position? Sounds like rebuild time! Stupid suggestion, might be a long shot but one more thing to check before it gets expensive..........................Have you checked to make sure the manual bleed screw(s) are closed tight,? Yea I did lol I was hoping it was that too... but alright I ordered all the seals for the tilt cylinder so I’ll if that works.. I imagine when I changed the seals out the first time I messed something up Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.