PlainoPathfinder Posted May 16, 2017 Report Share Posted May 16, 2017 So I have found another boat I am interested in and figured I'd list my boat here before craigslist or any other for sale sites. It's a 1998 Maverick Master Angler 18' 5" with a Yamaha 175 VMAX and a 2017 Fast load aluminum trailer. This is one of the cleanest MA's you will find especially for the year. I looked at several MA's before purchasing this one. The boat and motor have an original 176 hours. I have recently wrapped the boat black but I have some photos of it before the wrap which is a cabernet color. I had it wet sanded and buffed before the wrap and the gel coat is in good condition. I am the third owner of the boat, the first of which was an older man who was a snow bird so the boat was rarely used. I have gone through this boat and added over $13k worth of upgrades all within the last year which are listed below. Boat: 1998 Maverick Master Angler 18'5" Black 3m wrap professionally done by Sign Zoo New Steering wheel (still have the original) Wrapped wheel and grab rails New SeaStar Tilt helm and hydraulic lines Lowrance HDS9 Gen 3 with sonic hub New troling motor batteries (Feb. of 2017) Seadek under gunnels with Maverick logo Re-Wire (Everything from the console back including the fuse panel) New Lenco trim tab actuators New pumps ( Rule auto bilge, livewell and recirc) Atlas 4" Jack plate Powder coated black Dual Power-Pole Blade 8's with brackets New Yamaha 704 remote control binnacle Minn Kota 70lb 24V trolling motor (was on the boat when I bought it and is GREAT shape) Motor: Yamaha 175 Vmax 176 hours New plugs and lower unit oil changed about 5 hours ago 3 blade 19 pitch Yamaha prop It could use a new prop, the boat has amazing hole shot but suffers a little bit on the top end. 50mph with two people and gear and about 52 or 53 mph lighter load. Trailer: 2017 Fast load aluminum trailer with torsion axle Less than 100 miles on the trailer Saltwater package with all Stainless hardware Aluminum black wheels with spare drop leg jack $21,500 obo No low ballers please. You can add up all of the upgrades and see the value. You can't buy a MA 185 and add everything for near this price Link to comment Share on other sites More sharing options...
whichwaysup Posted May 16, 2017 Report Share Posted May 16, 2017 Gorgeous MA - someone will get a gem! Link to comment Share on other sites More sharing options...
Nag Juice Posted May 16, 2017 Report Share Posted May 16, 2017 Nice ride! GLWS Link to comment Share on other sites More sharing options...
Ejerome09 Posted May 16, 2017 Report Share Posted May 16, 2017 What are the dimensions when the boat sits on the trailer? Width from outside tire to outside tire? And from the back of the boat, not including engine, to the trailer tongue? I am hoping this would fit on the side of my house! thanks in advanced! Link to comment Share on other sites More sharing options...
hurricane Posted May 16, 2017 Report Share Posted May 16, 2017 Good looking boat, GLWS. Link to comment Share on other sites More sharing options...
PlainoPathfinder Posted May 17, 2017 Author Report Share Posted May 17, 2017 6 hours ago, Ejerome09 said: What are the dimensions when the boat sits on the trailer? Width from outside tire to outside tire? And from the back of the boat, not including engine, to the trailer tongue? I am hoping this would fit on the side of my house! thanks in advanced! approximately 8' 8" wide from outside to outside of each fender and 23'6" long from the transom to the end of the trailer tongue. This trailer is longer and wider than my last one as I didn't have any length or width restrictions. I think most torsion axle trailers will be the same width. Link to comment Share on other sites More sharing options...
PlainoPathfinder Posted May 23, 2017 Author Report Share Posted May 23, 2017 I had someone ask about the cushions. I have all of the original cushions and they're in great shape. Link to comment Share on other sites More sharing options...
hurricane Posted May 23, 2017 Report Share Posted May 23, 2017 I saw this boat over the weekend, it looks as good as the pics. Link to comment Share on other sites More sharing options...
horseshoe_scott Posted May 23, 2017 Report Share Posted May 23, 2017 Do you still have the poling platform? Link to comment Share on other sites More sharing options...
PlainoPathfinder Posted May 24, 2017 Author Report Share Posted May 24, 2017 13 hours ago, horseshoe_scott said: Do you still have the poling platform? Yes,it will go with the boat. Link to comment Share on other sites More sharing options...
mblanar33 Posted May 25, 2017 Report Share Posted May 25, 2017 Does the poling platform fit with the dual power pole mounts of the jackplate? Very interested and located in Tampa. Thanks Link to comment Share on other sites More sharing options...
PlainoPathfinder Posted May 25, 2017 Author Report Share Posted May 25, 2017 12 hours ago, mblanar33 said: Does the poling platform fit with the dual power pole mounts of the jackplate? Very interested and located in Tampa. Thanks Not with the current brackets, but I do have brackets that will accommodate the poling platform. Link to comment Share on other sites More sharing options...
fsusteve Posted May 25, 2017 Report Share Posted May 25, 2017 I'm thinking this thing is a prop change from being a rocket. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.